 |
| The Spot Micro Dresser |
Item: 42585 |
- Releases just the right amount of top dressing to repair ball marks on green
- Simple operation - just point and push
- Small enough to carry on any piece of equipment
- Removable top for easy fill ups
- Design keeps material dry for easy dispensing
- Use wherever ball marks are present
|
 |
|
 |
| Greens Brush/Drag Mat |
Item: 41054 |
The perfect light duty drag mat for gently brushing in top dressing and before mowing.A thick 5' x 5' natural fiber mat surface that evenly works top dressing into greens or stands grass up prior to mowing for a better cut. Won't damage sensitive greens grass and is flexible for consistent performance on uneven surfaces. A single hook point on either end attaches to the back of most any vehicle in seconds. Delivered completely assembled and ready for use. For baseball, renovate your infield between games with our multi-purpose drag mat.
|
|
|
 |
| Greenspeed Meter |
Item: 41074 |
Durable polycarbonate meter gives you the speed of the green, as you would get on a U.S.G.A. stimpmeter.
|
|
|
 |
- A simple but effective tool for dew removal from greens
- Three fiberglass sections telescope to 18'
- Bright yellow color gives it easy visibility when lying in grass
- Replacement tip available (#42430)
|
|
|
 |
| Dew Whip Replacement Tip |
Item: 42430 |
Replacement tip section now available. Tips will eventually wear particularly when used when greens still have surface sand from top dressing. Our rubber sheath on the tip increases with life but the entire tip section can be replaced if necessary.
|
|
|
 |
| Practice Green Marker 1-9 set |
Item: 41171 |
- Durable aluminum construction with long lasting powder coat finish
- "EZ-Lift" grip built in
- Numbered 1-9
Colors: White/Red, Red/White, Green/White, Yellow/Yellow, Black/Yellow. First color denotes top color
|
|
|
 |
| Practice Green Marker 10-18 set |
Item: 41172 |
- Durable aluminum construction with long lasting powder coat finish
- "EZ-Lift" grip built in
- Numbered 10-18
Colors: White/Red, Red/White, Green/White, Yellow/Yellow, Black/Yellow. First color denotes top color
|
|
|
 |
| Sand/Seed Bottle Holder |
Item: 42333 |
Green powder coated steel holder with spike holds single dispenser bottle for use on the tee.
|
|
|
 |
| Single No Cup Putting Green Target |
Item: 42336 |
- Three sided arc base provides hole like target
- White aluminum flag top, 5/16" aluminum shaft and stainless steel ground spike
|
|
|
 |
| Tri Vue Practice Green Markers Set of 1-9 |
Item: 41254 |
- Triangular powder coated cast aluminum markers
- Numbered 1-9
- Top, base and shaft are all replaceable and interchangeable with standard practice green markers
Colors: White/Red, Red/White, Green/White, Yellow/Yellow, Black/Yellow. First color denotes top color
|
|
|
 |
| Tri Vue Practice Green Markers Set of 10-18 |
Item: 41255 |
- Triangular powder coated cast aluminum markers
- Numbered 10-18
- Top, base and shaft are all replaceable and interchangeable with standard practice green markers
Colors: White/Red, Red/White, Green/White, Yellow/Yellow, Black/Yellow. First color denotes top color
|
|
|
 |
| Individual Regulation ABS Cup w/Bronze Bushing |
Item: 41240 |
Individual Regulation ABS Cup w/Bronze Bushing
|
|
|
 |
| Regulation ABS Cup w/Bronze Bushing Set of 9 |
Item: 41241 |
- Bearing grade bronze insert withstands abrasion and helps prevent the flagstick from sticking in the cup
- Increases cup life and reduces wear on the flagstick ferrule.
|
|
|
 |
| US Golf Hole Targets |
Item: 41383 |
Maintains putting consistancy by stabilizing hole diameter. With increased hole visability, greens play is faster. Cup consistancy restores fairness lost from varying cup sizes and shapes from green to green. Sold in sets of 18. Color: bright white.
|
|
|
 |
- 5/16" galvanized steel rod designed to lift the cup vertically
- Bright yellow powder coating prevents rust and makes it easier to find
|
|
|
 |
- Use on any regulation cup to keep debris from maintenance out
- Easily removed with our Standard Cup Puller
- Colors: Green or Yellow
|
|
|
 |
| Aluminum Regulation Cups |
Item: 42411 |
Regulation 6" x 4.25" hole cup
|
|
|
 |
| Regulation Cups |
Item: 40859 |
- Molded from a special impact resistant plastic
- Strong web structure eliminates warping assuring a consistently round easy to set cup
- 6" deep
- Sold in sets of 9
- Individual cups also available, item #42465
|
|
|
 |
| Putting Green Cups |
Item: 42529 |
- Molded from a special impact resistant plastic
- Strong web structure eliminates warping assuring a consistently round easy to set cup
- 4" deep
- Sold in sets of 9.
- Individual cups also available, see item #42464
|
|
|
 |
| Replacement Scalloped Blade for Hole Cutters |
Item: 42480 |
For use in Foot Extraction Hole Cutter (#41279) or Leverr (#41242)
|
|
|
 |
| Replacement Straight Blade Hole Cutters |
Item: 42481 |
For use in Foot Extraction Hole Cutter #41244 or Lever Type Hole Cutter #41243
|
|
|
 |
| Hole Cutter Guide |
Item: 41164 |
Powder coated aluminum guide promotes a straighter cut while protecting the green from boot marks. Helps hold the surface around the hole in place when removing the hole.
|
|
|
 |
| Aluminum Cup Setter |
Item: 41170 |
Precision tool of the highest quality aluminum for setting cup depth and smoothing the surface around the cup. Powder coated yellow to make it highly visible and hard to forget on the green.
|
|
|
 |
| Lever Type (Scalloped Blade) Hole Cutter |
Item: 41242 |
- Strong, lightweight aluminum alloy construction
- Heat treated blades give a clean cut hole every time
- Replacement blades also available / Item #42480
|
|
|
 |
| Lever Type (Straight Edge) Hole Cutter |
Item: 41243 |
- Strong, lightweight aluminum alloy construction
- Heat treated blades give a clean cut hole every time
- Replacement blades also available (#42481)
|
|
|
 |
| Foot Extraction (Straight Blade) Hole Cutter |
Item: 41244 |
- Strong, lightweight aluminum alloy construction
- Heat treated blades give a clean cut hole every time
- Replacement blades also available / Item #42481
|
|
|
 |
| Foot Extraction (Scalloped Blade) Hole Cutters |
Item: 41279 |
- Strong, lightweight aluminum alloy construction
- Heat treated blades give a clean cut hole every time
- Replacement blades also available (#42480)
|
|
|
 |
| Replacement Ferrules |
Item: 40844 |
For use with all of our flagsticks
|
|
|
 |
| Standard Stock Numbered Grommeted Pin Flags |
Item: 40848 |
- Sold in sets numbered 1-9 or 10-18
- 14 1/2" x 20"
- Requires a Pin Flag Swivel (#40955) for attachment to pin
Colors: White, Yellow, Red, Blue
|
|
|
 |
| Standard Stock Numbered Tube Style Pin Flags |
Item: 40850 |
- Sold in sets numbered 1-9 or 10-18
- 14 1/2" x 20"
Colors: White, Yellow, Red, Blue
|
|
|
 |
| 7' Tournament Flagsticks |
Item: 42422 |
- 3/4" diameter fiberglass increases both the strength and visibility of most of the flagstick
- Tapered to 1/2" top and bottom
- Accepts standard flag swivel or tube style flag
- Includes bottom ferrule and top nut
Colors: White or Yellow
|
|
|
 |
| 8' Tournament Flagsticks |
Item: 42423 |
- 3/4" diameter fiberglass increases both the strength and visibility of most of the flagstick
- Tapered to 1/2" top and bottom
- Accepts standard flag swivel or tube style flag
- Includes bottom ferrule and top nut
Colors: White or Yellow
|
|
|
 |
| 8 Foot 1/2" Fiberglass Flagsticks |
Item: 40843 |
Colors: White or Yellow
|
|
|
 |
| 7 Foot 1/2" Fiberglass Flagsticks |
Item: 41187 |
Colors: White or Yellow
|
|
|
 |
| Grommet Pin Flag Swivel |
Item: 40955 |
Works with most flagpoles. Tempered aluminum joining rod with 3 tough adjustable polyethylene grommet hooks.
|
|
|
 |
| Stock Tube Style Pin Flags |
Item: 40849 |
Hand sewn for years of play. 14 1/2" x 20". New tube style flags. Available in red, yellow, blue or white. Set of 9.
|
|
|
